Selection of Bell Tent Stove Jacks And Hole Covers/Flaps

Shop securely with a VAT registered Irish Trader

Selection of Bell Tent Stove Jacks And Hole Covers/Flaps
Prices from €49 ( Mini Stove Jack )

45° Stove Jack @ €89

Large Stove Jack @ €89

One of the primary benefits of canvas is it's ability to breathe, thereby releasing the moisture that is always accumulating inside a tent. This becomes particularly pronounced in cooler weather when water begins to condense inside a tent. A wood stove is the perfect solution for this situation, driving moisture out while keeping its occupants warm and toasty while giving them the ability to cook food,warm water and dry their gear out.

A little-known fact about wood stoves is that most of the heat comes not from the firebox but the 1st few feet of the exhaust pipe. The greater length of pipe inside the tent, the more warmth you will get from the stove. However, putting a hole in the roof of a tent can sometimes cause a leak at the stove jack during the rainy season, so another option is to have the stove exhaust exit through the side of the tent. In this situation where the exhaust pipe is necessarily very short, a larger firebox is called for.

Make sure to leave about 1m (or 3 feet) of flue pipe in between the stove and the flashing installed in the canvas of your tent.

45° Stove Jack @ €99

Exit I 45° Stove Jack allows you to exit your wood burning tent stove flue pipe through the sloped roof of any bell tent. Made out of stainless steel and galvanized rubber, this heat resistant flashing is easy to assemble and compatible with most flue pipe diameters. The rubber can be cut to fit the specific diameter of your flue pipe to ensuring your chimney vent is secure and water tight.

Total weight (kg / lbs) 0.7 / 1.5
Flue Compatibility 50 - 110mm (2" - 4-1/4")



Stove Jack @ €99

The Exit I Stove Jack is a flashing to safely vent a wood burning tent stove from a canvas or poly-cotton tent. The Exit 1 fits flue pipes up to 160 mm (6'') in diameter and can be easily cut to fit snugly around most flue pipes. Works with side exit and top exit tent stoves.

Total weight (kg / lbs) 0.7 / 1.5
Flue Compatibility 75 - 160mm (3" - 6-1/4")


Mini Stove Jack @ €59

When using a tent stove in your tent, a modular tent stove jack is the best way to exit your flue pipe either through the top of the tent, or through a side wall if your stove allows for it. The Exit I Mini Stove Jack is the smallest flashing we offer and accepts stove pipes up to 7cm (4-3/4") in diameter. The stove jack is made out of stainless steel and galvanized rubber to securely hold hot flue pipe sections a safe distance away from the canvas. To make your pipe fit perfectly you can cut the rubber jack to the right diameter. All the hardware required for installation is included for quick and easy assembly. If you are using a bigger tent stove with a wider flue pipe, check out our larger stove jacks above.

Total weight (kg / lbs) 0.4 / 0.9
Flue Compatibility ≤ 100mm (4")

Stove Hole Cover/ Flap

Add a stove flap to your tent so you can close the hole where your stove jack is fitted when you're not using your tent stove. We recommend to get this fitted by a professional sailmaker or seamstress.
This flap can be used on its own or in combination with a stove jack.
The hole fits a stove pipe with a diameter of 11cm, you can cut a bigger hole if needed.

Total weight (kg / lbs) 0.5kg
Length 49cm
Width 46cm

Jonscamping.ie