Mackie Thump Speakers and 18" Sub Package Deal

Mackie Thump 12a
&
Thomann "The Box 18"

Only selling as Ive upgraded
I've attached in the photos pictures of the original receipt to show when purchased

Specs for both are pasted below
Looking to sell as a package rather than separately

Never gave me a day's trouble since day of purchase
Amazingly reliable

Demonstration can be provided



Mackie Spec's

Frequency Range:
-10dB: 50Hz - 23kHz
-3dB: 57Hz - 20kHz
Coverage Angle: 90° x 60° (H x V)
Maximum SPL: 126dB
Monitor Angle: 45°
LF Transducer: 12'' / 305mm (with ferrite)
HF Transducer: 1.4'' / 36mm titanium dome compression driver
Rated Power: 1300W peak
LF Power Amplifier:
Rated Power: 1000W peak
Cooling: Convection
Design: Class-D
HF Power Amplifier:
Rated Power: 300W peak
Cooling: Convection
Design: Class-AB
Input Type:
2 x Female XLR, balanced
1 x 1/4'', unbalanced
Mic-Line Impedance: 8 k Ohms, balanced
1/4'' TS, Wide-Z™ Impedance: 1 M Ohm, unbalanced
Mix Output: Male XLR, balanced
Mix Out Impedance: 600 Ohms, balanced
Main Control: Rotating knob, 0dB at full clockwise
Sensitivity:
Main Control at 12:00: +4dBu for full output (Channel at 12:00)
Main Control at Fully Clockwise: +18dBu (Channel at 9:00)
Main Control at Fully Clockwise: -35dBu (Channel at fully clockwise)
Crossover: 2kHz, 24dB/Octave
Input Protection:
Peak and RMS limiting
Power supply and amplifier thermal protection
Display LEDs:
Defeatable front power
Input signal/OL
Speaker mode
System limiter
Cabinet:
Design: Trapezoidal
Material: Polypropylene
Finish: Black, textured
Handles: 2 x sides, 1 x top, 1 x bottom (4 x total)
Grille: Perforated metal with weather-resistant coating
Pole Receptacle: Yes
Dimensions: 615mm x 358mm x 356mm / 24.2'' x 14.1'' x 14'' (H x W x D)
Weight: 13.2kg / 29.1lbs
Great and reliable set, never let me down
Frequency Range:
-10dB: 50Hz - 23kHz
-3dB: 57Hz - 20kHz
Coverage Angle: 90° x 60° (H x V)
Maximum SPL: 126dB
Monitor Angle: 45°
LF Transducer: 12'' / 305mm (with ferrite)
HF Transducer: 1.4'' / 36mm titanium dome compression driver
Rated Power: 1300W peak
LF Power Amplifier:
Rated Power: 1000W peak
Cooling: Convection
Design: Class-D
HF Power Amplifier:
Rated Power: 300W peak
Cooling: Convection
Design: Class-AB
Input Type:
2 x Female XLR, balanced
1 x 1/4'', unbalanced
Mic-Line Impedance: 8 k Ohms, balanced
1/4'' TS, Wide-Z™ Impedance: 1 M Ohm, unbalanced
Mix Output: Male XLR, balanced
Mix Out Impedance: 600 Ohms, balanced
Main Control: Rotating knob, 0dB at full clockwise
Sensitivity:
Main Control at 12:00: +4dBu for full output (Channel at 12:00)
Main Control at Fully Clockwise: +18dBu (Channel at 9:00)
Main Control at Fully Clockwise: -35dBu (Channel at fully clockwise)
Crossover: 2kHz, 24dB/Octave
Input Protection:

Peak and RMS limiting
Power supply and amplifier thermal protection Display LEDs
Defeatable front power
Input signal/OL
Speaker mode
System limiter
Cabinet:
Design: Trapezoidal
Material: Polypropylene
Finish: Black, textured
Handles: 2 x sides, 1 x top, 1 x bottom (4 x total)
Grille: Perforated metal with weather-resistant coating
Pole Receptacle: Yes
Dimensions: 615mm x 358mm x 356mm / 24.2'' x 14.1'' x 14'' (H x W x D)
Weight: 13.2kg / 29.1lbs


The Box 18 Specs

Active 18" Bandpass Subwoofer
Power: 500 W RMS
Frequency range: 35 Hz to 250Hz
Stereo XLR Input
SPL Max (1m): 131 dB
Dimensions (H x W x D): 693 x 530 x 580 mm
Weight: 45 kg