LAUNCH X431 CRP909X OBD2 Scanner Full System Code Reader wifi Diagnostic Tool OBD cable

Condition:
Brand new

https://youtu.be/sm99zepEsEc

The machine has 15 reset function, for extra 45 euro will put 11 more total 26 reset function 440 euro

CRP909X is an upgraded version of CRP909E, have potential of 26 reset functions, and has a physical button, which can be used to operate after the touch screen fails, which is more durable

MONITOR ALL SYSTEMS WITH EASE: THE LAUNCH CRP909X comes with full systems diagnoses, to quickly find out what the MIL means and allows you to fix vehicle problems. Besides reading MIL, it also can read version Information to determine the tested control unit, read and erase DTCs, read Live data for deep analysis.

15 RESET FUNCTIONS: The LAUNCH CRP909X has 15 competitive reset services: Oil Reset / SAS Reset / EPB Reset / BMS Reset / DPF Regeneration / ABS Bleeding / IMMOBILIZER / Sunroof Reset / Suspension Reset / Gearbox Reset / AFS Headlamp Reset / Injector Coding / Gear Learning / TPMS Reset / Throttle Adaptation.
ONE-CLICK OPERATION: This diagnostic tool allows you to access the following features just with only one click: Auto-scan the VIN; Update to the latest software and hardware.

MORE THAN 54 COMPATIBLE VEHICLES: It is compatible with 54 different vehicle brands and thousands of models worldwide including Smart, Sprinter, BMW, Mini, Nissan, Acura, Jeep, Ford, etc.
Launch x431 CRP909x Compatibility
It is compatible with more than 54 brands:
Europe:: Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, Lancia, Landrover, Mini, Opel, Peugeot, Porsche, Renault, Euro Ford, Fiat, Abarth, Alfa Romeo, Audi, BMW, Bugatti, Citroen, Dacia, VW, Jaguar, Mercedes,
Asia:: Subaru, Suzuki, Toyota, Lexus, Mazda, Mitsubishi, Nissan, Nissangtr, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Acura, Kia, Renault Samsung, Tlisuzu.
America:: Lincoln, Dodge, GM, GMSA, Ford, Jeep, Buick, Cadillac, Chrysler, Chevrolet.

1.PCM(Drive System):
Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear,
and more...

2. Chassis System:
Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS
and more...

3.BCM(Body System):
SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone,
and more...

4.Electrical System
Including Centralized control system for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information / entertainment system.

Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.

LAUNCH CRP909 Support Below 15 Kinds Maintenance Functions:

In addition to amazing & powerful diagnostic function, CRP909 also features various service functions. The most commonly performed service functions contain:

1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Professional Fast Identifies VIN Number:

Once connect with car OBD2 port , CRP909 will AutoDetect car Vin number. Give you a quick access to start the vehicle system detection.

Perfect Performs Vehicle Battery Analysis

For 12V car, SUV, Van, Light Truck, Pickup.
Detect real-time data from 12V batteries and display BATTERY DATA with fluctuations ranging from 8V to 16V.
The discharge voltage of a normal battery is about 12V, the starting voltage is generally 12V, and the charging voltage is about 14V

One-Key I/M Checking

It support one-key I/M checking for all available emission systems.Help your car pass the emission test simpler.

LAUNCH X431 CRP909 Technical Support

LAUNCH Technical team offer free support for you, once you meet any problem, you can
1.Upload Could Feedback
2.Share Diagnose report
3.Contact with customer service directly

LAUNCH X431 CRP909 Support Languages

English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean.

You can switch language freely !

Official LAUNCH X431 CRP909X OBD2 Car Scanner Automotive Diagnostic Tool Auto Scan Diagnoses All system PK X431

Auto gearbox
Injector coding

DPF

Electronic handbrake

15 Reset Functions

1.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Key Programming

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

More in Other
(6,251)
More from this seller
(214)
Shipping:
  • Collection
  • Delivery
  • Post/Courier
  • To be arranged
Payment:
  • Cash
  • Paypal
  • Bank transfer
  • To be arranged
Entered/Renewed:

7 months ago

Ad Views:

7,004

  • Report ad
SELL SOMETHING SIMILAR
Comments & Offers
1 week
28 reset function now
1 week
Available now
4 weeks
@S1992 no
4 weeks
so none available at all before the 16th no? thanks
4 weeks
@S1992 will see what if I get more soon
4 weeks
@S1992 no sorry
4 weeks
€395 OFFERED
Will you have this by 15th November? Travelling the next morning so need the 909x before the 16th. Thanks
1 month
Tks keep me posted please
1 month
@BUACHAILL next week
1 month
Available?
1 month
@JZAUTOZ not at the min
1 month
Is this still available?
2 months
@ovidiu112 sold
2 months
€390 OFFERED
2 months
Still available:
2 months
€395 OFFERED
2 months
@ROS$ send offer thanks
2 months
can i get your number?
3 months
Available
7 months
Available