Bibo Dual Filament 3D Printer

Bibo Dual filament 3D printer. This unit has seen light classroom use, the second filament head used soluable filament to print intricate designs. There is also a laser engraver head which is boxed and has never been used with the unit. Can add filament at extra cost

The BIBO 2 Touch Laser is the most commonly featured printer. Order the BIBO 2 Touch Laser now and you will receive the WiFi module (USD6, pre-installed) and laser engraving module (USD17) as a gift. It is, of course, a 3D printer. At the same time, it is also a laser engraving device that allows you to engrave wood, or even cut paper and cardboard. Not every 3D printer has an extra function like this, and those who do often cost much more than this machine.

3 in 1? Yes, the BIBO 2 Touch Laser corresponds to a laser engraving machine and 2 3D printers (with copy printing, you can print two identical objects at the same time).

Machine Parameters:
Number of extruders: 2.
Metal frame. 6-mm thick aluminium composite plate. More reliable and accurate than plastic frames.
Full-colour touch screen: yes.
Laser engraving: yes.
WiFi Control: yes.
Copy Printing: yes.
Continues printing after power failure: yes.
Empty filament detection: yes.
Removable heated bed: yes (already levelled, usually no post-levelling required).
Number of fans to cool extruded plastic: 2.
Print mode: USB connection to PC, SD card or U disk.
Machine size: 46 x 36 x 37 cm.
Weight: 16 kg.

Print parameters:
Size: 214 x 186 x 160 mm.
Printing layer resolution: 0.05–0.3 mm.
Maximum nozzle temperature: 270 °C.
Recommended software: Repetier-Host, Cura, Simplify3D.
Compatibility: Windows, Mac, Linux.
Filament type: ABS (acrylonitrile butadiene styrene), PLA (polylactic acid), removable filament (PVA, HIPS (high impact polystyrene)), flexible filament (TPU (thermoplastic polyurethane)).
Filament diameter: 1.75 mm.