Specialising in Technics SL series 1210/1200 Servicing, calibration, repairs and modifications of MK2, 3, M3D and 5

I have spent many years developing my skills, I use a specially designed jig and tools to carry out all my work to the highest standard, I will look after them as if they were my own and bring them back to full electrical and mechanical operation, your decks will be in very safe hands.

Much of my work is often fixing and putting right bodge jobs (poorly completed work) or damage to the turntables.

Once I get the units and have had time to check them over I will give you an honest and very detailed assessment of them, you can then decide what you would like done, the cost of this assessment is included in your service so it does not cost you anything extra, there is no obligation to have anything done outside the basic service if you don’t want that (or are on a budget), I always aim to work with the customer to get the best results.

Service per deck €120 (*read notice update at the end of this ad) includes:-

Stripping down the units for full clean of interior and exterior, including tonearm parts.

Calibration of pitch zero point back to factory settings (fixes the double zero point effect)

Calibration of pitch range (+8/-8) back to factory settings

Brake calibration

Complete breakdown of centre spindle, deep clean, application of graphite grease and genuine spindle oil 'Technics SFW0010' (for Technics sl-1200, sl-1210) and rebuild.

Re-damping of Target light, restores the smooth motion of the lamp to factory specs and also helps to prevent possible short circuit of main board (expensive fix) due to cable wear by the mechanism.

Tonearm Height adjustment refurb:-
Involves disassembly of the unit, full removal and strip down of the tone arm assembly, deep cleaning of all threads, re-grease and reassembly, if not done it will cease up completely as the grease hardens with age, the grease I use is a higher spec ‘helicoid grease’


Service Document (supplied)- proof of service and details all work carried out and contact information, very useful if you ever decide to sell your turntables, I keep a record of all serial numbers if you wish to reference this.

I will also put your turntables through their paces with a full field test.
Turnaround time is usually a few days (sometimes longer if parts need to be ordered)
This service goes way beyond the bog standard service in the service manual.


Repairs per deck (outside the basic service):-

Pitch Replacement.
:-€50 *in stock (€40 as part of a service)
Involves disassembly of the unit, removal and desoldering the part from the pcb, re-soldering the new pitch into place and calibration.
This is the preferred SFDZ122N11-2 pitch with original centre click and better +/- 0.5mm quartz lock (LED lights up). Also replaces SFDZ122N11 and SFDZ122N11-

Tonearm damage:- unfortunately this is becoming a very common occurrence , sometimes the damage can be fixed but more often that not the tonearm will need to be replaced, either with a refurbished arm €220 or a new (old stock) arm, the latter are extremely hard to source though due to the rarity, costing anything from €300-€500 ‘if’ they can be found, the MK7 arms also fit but they also have a similar high cost as the whole highly assembly comes with it (arm is not available separately), it functions but does however have a different shape/form so will not have the same look as the originals.

Replacement of main circuit (motor) board - €250 (fully refurbished, recapped, known problem areas reflowed with the highest spec lead solder + heatsink for the AN6680.

Board diagnostics:- repair cost will depend on the fault but I can give you a quote once I have tested the board (contact me).

Main Board recap and sil/heatsink of control chips - €80 (*€60 if getting a service)
More info here:- https://www.adverts.ie/turntables/technics-sl-1200-1210-capacitor-upgrade-kit/27193584

https://www.adverts.ie/turntables/technics-sil-connectors/27433969

https://www.adverts.ie/turntables/technics-heatsinks/27433839

RCA cable replacement:- €40 fitted *in stock (€30 as part of a service)
These cords are a perfect replacement for the original Technics part numbers SFDH122-05 / RJL2P009S12 / RJL4P002S12.
Hand made by myself to a high tolerance using quality leaded solder
Fits the tonearm cable clamp perfectly
Sommer SC-ONYX 2025
Length:- 1200mm
Gold platted Rean connectors by Neutrik
AWG 24
Shielding factor 90%
Capacitance cond./shield. Per 1m (pf): 120
These are priced per unit at a very competitive price
I can make up longer leads on request but be aware that the sound quality does drop when the length is increased, it should not be an issue in most situations as long as they are not more than 2-3 metres.

Ground cable replacement €15 (€10 as part of a service)

Refinish of platter dots and edge €20, if you have ever tried to do this with cleaning products and found that it doesn't work, that is because the original finish was done at the factory with a machine lathe, I mechanically refinish the edge with a jig of my own design to bring back the shine, it will eventually oxidise again over time but will still last years.


Modifications (per deck)

Upgrade pop-up (target light) to LED €30 (I have most colours in stock, just ask)
*€20 when carried out as part of a service

Full LED conversion:- €20 per sub assembly, ie. target light, pitch, 33/45 and strobe to colour of choice.

Tough Plug:- €10 (fitted) extremely strong black plug to replace the continental 2 pin and aftermarket white 3 ping plugs supplied on some models (eliminates the need for adapters or old brittle standard UK/Ireland plugs), Technics branded plugs are €15

Power cord replacement (new):- €10

Quartz lock removal on MK5G model:- free as part of a service, it does not fix the known problem with the digital pitch control but it does make mixing/beat matching a lot easier, if you are a scratch dj it is not really an issue, these mods can be easily reversed if required.


Drop off is safest though posting via courier or Anpost is an option.

I am located in Kilmore Quay, Wexford

I also buy old and/or damaged Technics decks, any condition considered.

Any questions just ask

Thank you
Chris

*note, due to brexit some prices have gone up on parts because of import fees, please ask so I can check the price

***notice*** from January 2026 onwards the cost of the basic service is now €120 (formally €100), the height adjustment was always a separate job outside the service at cost of €20, now it is a standard part of the basic service, ie if you were getting the height adjustment done anyway (which is often the case) then it it won’t cost anything extra.