Cleanfast Multi Shine Neutral Floor Maintainer 5L

Cleanfast Multi Shine | Neutral Floor Cleaner, Wax Maintainer & Gloss Restorer

Cleanfast Multi Shine is a professional neutral floor maintainer designed to clean, protect and restore the appearance of polished floors. Combining everyday maintenance cleaning with gloss restoration, it provides an effective solution for floors that need regular washing without continually stripping away or damaging their existing finish.

Unlike an aggressive floor cleaner or degreaser, Cleanfast Multi Shine is specifically formulated for ongoing maintenance. During regular use, it helps maintain the existing floor coating while depositing a very fine protective layer that blends with the previous finish. This can help improve dull and lightly worn areas and restore the attractive glossy appearance associated with professionally maintained flooring.

Cleanfast Multi Shine dries quickly and streak free, produces a glossy slip-resistant finish and contains a pleasant, refreshing fragrance. It can be applied using a conventional mopping system and can also be incorporated into professional floor maintenance programmes using a high-speed floor buffer.

Manufactured in Ireland and highly concentrated, with a recommended dilution of 1:50, Multi Shine is an economical solution for homes, offices, schools, shops, hotels, restaurants, public buildings and other environments containing polished floors.

## Clean and Restore Polished Floors in One Operation

A polished floor requires a different maintenance approach from an untreated surface.

Everyday foot traffic gradually affects the protective coating. Shoes introduce grit, dirt and moisture, while chairs, trolleys and general movement can create fine marks and dull areas. Eventually, a previously attractive polished floor can start looking patchy even when it is regularly cleaned.

Cleanfast Multi Shine is designed to address both cleanliness and appearance.

The diluted solution removes superficial everyday contamination while simultaneously helping replenish the existing finish.

With repeated maintenance, the product can help build and preserve the protective surface rather than simply washing the floor and leaving nothing behind.

This makes Multi Shine particularly valuable in busy commercial environments where maintaining presentation is almost as important as removing everyday dirt.

## Restores Gloss to Dull and Worn Areas

One of the principal functions of Cleanfast Multi Shine is gloss restoration.

The product bonds with compatible pre-existing finishes and leaves an additional protective layer. After burnishing, this layer blends into the existing finish and helps restore a smoother, glossier appearance.

Small imperfections and dull sections can therefore become considerably less noticeable.

This is particularly useful in high-traffic areas such as entrances, corridors, reception areas, retail floors and frequently used walkways where the original polish experiences concentrated wear.

Repeated maintenance can gradually build the finish when required.

Rather than waiting until the entire floor looks exhausted, regular application helps preserve its appearance and can extend the period between more disruptive stripping and complete refinishing procedures.

## Ideal for High-Traffic Commercial Floors

Commercial flooring can experience hundreds or even thousands of footsteps every day.

Schools, shops, offices, hotels, pubs, restaurants, healthcare environments and public buildings therefore require a practical maintenance programme.

Cleanfast Multi Shine can be incorporated into routine floor care to help control everyday superficial contamination while preserving gloss.

Because it is highly concentrated, a relatively small quantity of product produces a substantial volume of usable cleaning solution.

At the standard 1:50 dilution, approximately 100ml of Multi Shine is required for 5 litres of water.

This makes the product particularly economical where large floor areas require frequent maintenance.

## Suitable for Polished Floors

Cleanfast Multi Shine can be used on all types of compatible polished flooring.

Its primary purpose is maintaining an existing polished or sealed finish rather than deep cleaning an untreated, porous floor.

The product works particularly well where a compatible coating is already present because the maintainer can bond with and supplement that existing finish.

Before using it on an unfamiliar surface or specialist coating, test a small inconspicuous area and confirm compatibility.

If the floor is extremely dirty, greasy or contaminated, do not expect a neutral maintainer to replace a heavy-duty cleaner. Deep contamination should be removed first with an appropriate floor cleaning product. Multi Shine can then be used as the final maintenance treatment.

## How to Use Cleanfast Multi Shine with a Mop

Correct dilution and controlled application provide the best results.

**Step 1 – Remove loose dirt**

Vacuum, sweep or dust-mop the floor before wet cleaning. Sand, grit and loose debris should not be dragged across a polished surface during mopping.

**Step 2 – Prepare the solution**

Dilute Cleanfast Multi Shine with warm water at the recommended ratio of **1:50**.

For example, add approximately **100ml of Multi Shine to 5 litres of water**.

Mix the solution thoroughly before application.

**Step 3 – Mop the floor**

Apply the diluted solution evenly using a clean mop or professional flat-mopping system.

Avoid unnecessarily flooding the floor. A controlled amount of cleaning solution is normally sufficient.

Work systematically from the furthest area towards the exit so you do not need to walk over freshly maintained flooring.

**Step 4 – Allow the floor to dry**

Leave the cleaned floor undisturbed for a few minutes until dry.

Multi Shine is formulated to dry quickly and streak free when correctly diluted and applied.

**Step 5 – Buff for maximum gloss**

Once dry, buffing will develop the best finish.

For professional results, use a high-speed floor buffer operating above approximately **400 RPM** with a suitable red or white floor pad.

Buff systematically across the floor until an even gloss develops.

## How to Build Gloss on a Dull Floor

A particularly worn floor may not regain its maximum appearance after one maintenance wash.

Cleanfast Multi Shine can be used repeatedly to gradually build the protective layer.

Dilute and mop the floor normally, allow it to dry and buff it. Repeat during subsequent maintenance cycles where additional build is required.

The thin maintainer layers help fill minor imperfections and blend with the existing finish.

Avoid trying to accelerate this process by applying excessive quantities of undiluted product. Controlled applications followed by proper drying and buffing provide a more uniform result.

## What If the Floor Is Very Dirty?

Cleanfast Multi Shine has deliberately moderate cleaning power because its principal function is floor maintenance and gloss restoration.

A floor covered in heavy grease, ingrained dirt or substantial residue should therefore be deep cleaned first.

Use an appropriate stronger floor cleaner or degreaser to remove the contamination, following that product's instructions carefully.

Rinse or neutralise the floor where required and allow it to dry.

Once the underlying surface and existing finish are properly clean, use Multi Shine as the maintenance treatment.

This prevents heavy dirt from becoming trapped within newly deposited maintainer layers.

## High-Speed Burnishing for Professional Results

Although Cleanfast Multi Shine can be applied using a normal mopping system, high-speed burnishing considerably enhances its appearance.

Burnishing helps blend the newly deposited maintainer with the existing floor coating while developing a smooth, attractive gloss.

Use a compatible high-speed machine above approximately 400 RPM and select an appropriate red or white floor pad.

Ensure the floor is dry before burnishing.

Professional cleaners maintaining large commercial floors can incorporate this process into a scheduled programme, using Multi Shine for regular maintenance and periodically burnishing according to traffic levels and desired appearance.

## Important Safety Instructions

Always read the product label and current Safety Data Sheet before using Cleanfast Multi Shine.

**Wear suitable protective gloves and eye protection when handling the product**, particularly when preparing cleaning solutions.

Keep the product out of reach of children and unauthorised users.

Avoid contact with the eyes and unnecessary prolonged skin contact. If accidental exposure occurs, follow the first-aid instructions supplied with the product.

Never mix Multi Shine with bleach, acids, strong alkaline cleaners or other cleaning chemicals unless compatibility has specifically been confirmed.

Store the product upright in its original labelled container with the cap securely closed.

During floor cleaning, remember that a wet polished floor can create a temporary slip hazard. Restrict access to freshly mopped areas and use appropriate wet-floor warning signs until the surface is completely dry.

Do not operate a floor buffer on a wet floor. Allow the maintained surface to dry before burnishing.

## Professional Daily Care for Beautiful Polished Floors

Cleanfast Multi Shine provides a practical combination of everyday cleaning, floor protection and gloss restoration in one highly concentrated product.

Its **1:50 standard dilution** offers excellent economy, while the fast-drying, streak-free formulation makes regular maintenance straightforward. The pleasant fragrance leaves the surrounding area feeling freshly cleaned, while the maintainer helps produce an attractive glossy, slip-resistant finish.

Used regularly, Multi Shine bonds with compatible existing finishes, helps disguise small imperfections and replenishes gloss in areas affected by everyday traffic.

For maximum results, simply dilute with warm water, mop evenly, allow the floor to dry and finish with a high-speed buffer and suitable red or white pad.

Whether maintaining floors in a school, shop, office, hotel, restaurant, public building or home, **Cleanfast Multi Shine Neutral Floor Maintainer** offers an economical and professional way to keep polished flooring cleaner, glossier and better protected against the effects of everyday use.