Quad 99 Power amp Pre amp CD player

Exellent condition system with quad links power link and power links. No remote control. Check reviews on for yourself a set and forget set up.
Pre amp.
The unit has inputs for three line level sources, one RIAA equalised phono input and a tape loop in addition to those sources available on the Quadlink communications BUS.

The preamplifier includes noiseless solid state signal switching and digitally addressed analogue volume and balance controls.

Mains powered, Quad-Link inputs plus 3 line inputs, one tape input and configurable (mm/mc) phono stage - all with adjustable sensitivity.

Pre-amp outputs via Amp-bus, stereo phonos and tape loop (comes with full system remote control)

Specifications
Frequency response: 10Hz to 20kHz

Total harmonic distortion: 0.002%

Input sensitivity: 3mV (MM), 300mV (line)

Signal to noise ratio: 78dB (MM), 97dB (line)

Output: 300mV (line), 0.775V (Pre out), 3.3V (Pre out Max)

Dimensions: 321 x 70 x 310mm

Weight: 4.42kg
Power amp
Quad power amplifiers have always been
amongst the finest in the world. Over the
years, they have earned a reputation for
being ‘straight wires with gain’, because they
neither add nor take anything away from the
original music signal.
The 99 Stereo Power Amplifier uses a
dual complementary feedback circuit with
exceptional stability margins to achieve
exemplary performance and an output
of over 80 watts per channel. Overload
recovery is instantaneous and the amplifier
is fully protected against over-driving or
misuse, without resorting to output line
fuses or relays.
Cd player.
The 99 CD-S is a brand new model, offering
a similar level of sound quality to the CD-P,
but in a simple format. This model dispenses
with the additional digital inputs and the
variable output level of the full CD-P.
Using a brand new transport, our own
proprietory loading mechanism, control
software and the most advanced decoding
with the emphasis on reading data
correctly, the CD-S produces a sensational
performance without fuss.
Mains powered and offered with standard
RCA connector or with a ‘bus-link’ to be
connected through a Quad pre-amplifier, the
CD-S is as versatile as it is practical. When
used with the ‘bus-link’ system, the CD
player is operated through the system remote
control (supplied with the pre-amplifier) and
dovetails seamlessly into the system. Power
triggers, system commands and balanced
audio signals are all communicated through
the bus system. The CD-S uses Crystal
24bit/96kHz DACs for a high resolution,
detailed soundstage.