Bang and Olufsen - Beocenter 2 Amplifier CD Radio Video System Stunning World Class Sound with Media Centre and Floor Stand

Rare Bang and olufsen Beocenter 2 with Media Centre and Floorstand
Stunning Looking and world class Sound

Bargain at this price


The BeoCenter 2 is an integrated and versatile audio and video system offering easy access to CD audio, AM/FM Radio and DVD video. The philosophy behind BeoCenter 2 is to provide a physically compact system offering total integration of picture and sound. The high degree of compactness has been achieved by separating the Master Unit, containing the operation and disc transport mechanism, from the Socket Unit. The Socket Unit (shown right) contains most of the electronics, as well as all external connections. This greatly helps the organising and concealment of the numerous cables needed in a typical A/V set-up. In BeoCenter 2 only a single thin cable, available in 1.8, 3, 5 and 10 metre lengths, connects the Master Unit to the Socket Unit. A 1.8 metre cable is delivered as standard.

 

World Class Aluminium Processing

BeoCenter 2's two sliding aluminium doors were a challenge to Bang & Olufsen. Both doors are cut from the same piece of aluminium, but only after the front has been polished in the oval shape that follows the lower edge of the display. This ensures that all details in the polishing are echoed on both doors. Both these sliding doors stay together throughout the complicated process of milling and the two surface treatments. So the doors on the final product match perfectly.

The precision requirements Bang & Olufsen sets for the visual appearance of the product mean that the machine which grinds the edges of the doors works to very small tolerances. For every 1/100 millimetre along the edge, the machine calculates and self-corrects to ensure a perfect oval shape.

When the aluminium is surface-treated in the anodisation plant, tiny pores appear in the surface. These pores are used in the screen printing employed to apply numbers and characters to the front of the doors of the master unit. By pressing the coloured lacquer down into the pores and then surface-treating the doors, very durable printing is achieved. As a result, it is virtually impossible to wear the printing off, even with very frequent use.

Controlling the BeoCenter 2 is a masterpiece of precision. The area beneath the master unit is milled down to 0.5 millimetres. So when the user presses the unit, the thin aluminium sheet bends very easily. This activates the electrical circuits used for the control function. You can neither see nor feel this, but it is enough for it to make contact with the film of conductive material underneath.

 

The precision processing goes one stage further with the "wheel" on the right-hand door. In a wide circle around the control areas, a further 0.1 millimetre of aluminium has been milled off. The functions of the wheel include adjusting the volume, and it functions according to the same mechanical principle as the rest of the master unit.