Guitar pedal board ends.

These 3d printed guitar effects pedal board ends allows the end user to construct a effects board to their desired length. These can be used with 25mm battens cut to length and fixed with screws as shown. Note, screws and battens are not included. Postage is €8.50 unregistered anywhere in Ireland. Payment via Revolut or cash on collection.

These Guitar Pedalboard end brackets are suited for use with 25mm x 25mm timber battens. The battens are centered at 75mm centre's. Simply cut the Timber battens to the desired length and fit and fix with screws through the screw holes provided. The convenience of this system is that the end user can have a pedal board any length they desire, there are additional support profiles available for longer pedal boards, these are at an additional cost so please contact me to request additional supports based on your needs.

Depending on the length of the Pedal board required by the end users a intermediate support piece could be needed also. This supports the span and ensure overall stability of the board. The additional support piece is an additional €8

Standard 2 End Pieces: €30
Standard 2 End Pieces + intermediate support: €38

The above is available in PETG material - add an additional €4 to the price.

Postage is €8.50 unregistered to anywhere in Ireland

YOUTUBE RUNDOWN OF THE DESIGN: https://youtube.com/shorts/6-NDlXqpwRs?si=8C0p_9sEYUdgQP

TIKTOK: https://vm.tiktok.com/ZNRBTYvYc/