Faber Clean Wood Greentech

Faber Clean Wood Greentech | 100% Eco Wood & Parquet Floor Cleaner

Faber Clean Wood Greentech is a professional-quality, eco-friendly cleaner specifically developed for the regular cleaning and maintenance of wooden and parquet floors. Formulated using rapidly biodegradable, plant-derived ingredients, this highly concentrated cleaner effectively removes everyday dirt and residue while remaining gentle on sensitive wood surfaces and their protective finishes.

Unlike aggressive general-purpose detergents that may dull or damage wood over time, Faber Clean Wood has been designed specifically with timber surfaces in mind. It provides effective everyday cleaning without leaving behind the sticky film, streaks or unwanted surface residues commonly associated with some traditional no-rinse cleaners.

Suitable for both oiled and varnished wooden floors, Clean Wood can be used in residential and commercial environments. It is an excellent choice for houses, apartments, offices, hotels, restaurants, schools, shops and other premises containing natural wooden flooring.

The product is highly concentrated, providing exceptional economy. Depending on surface conditions, just 50–100g is diluted into 5 litres of water. One litre can provide coverage of approximately 1,000m², making Faber Clean Wood Greentech particularly economical for routine floor maintenance.

## 100% Eco-Friendly Wood Floor Cleaner

Faber Clean Wood forms part of the Faber Greentech range, which focuses on combining professional surface-care performance with environmentally responsible formulations.

The cleaner is 100% water based and manufactured using rapidly biodegradable, plant-derived ingredients. Raw materials within the formulation are Ecolabel recognised or certified.

This makes it an excellent alternative for customers who want to reduce their reliance on unnecessarily aggressive cleaning chemicals without sacrificing professional cleaning performance.

Its environmental approach also extends to the packaging, with Clean Wood supplied in recyclable, biodegradable plastic.

Choosing an eco-friendly cleaner is particularly relevant for products used frequently. Wood floors in busy homes and commercial premises may require cleaning several times every week, so using a concentrated, biodegradable formulation can make a meaningful difference over the lifetime of the floor.

## Designed Specifically for Wood and Parquet

Wood requires a different cleaning approach from tiles, concrete and many other hard surfaces.

Natural timber is sensitive to excessive moisture and aggressive chemicals. Using strong alkaline cleaners, acidic products or inappropriate household cleaning solutions can negatively affect the protective coating and appearance of the floor.

Faber Clean Wood has been specifically formulated for parquet and wooden surfaces.

Its gentle cleaning action removes normal contamination without unnecessarily attacking the underlying finish.

It can be used on compatible oiled and varnished wood floors, making it a versatile solution where different types of wooden flooring are present within the same property.

Clean Wood is suitable for indoor and outdoor compatible wooden and parquet surfaces, providing a practical specialist cleaner for routine timber maintenance.

## Removes Everyday Dirt Without Leaving Sticky Residue

One of the problems with some conventional floor cleaners is the residue they leave behind.

Repeated washing can gradually produce a sticky surface film. Instead of making the floor easier to maintain, this residue can attract additional dirt and cause the surface to lose its clean natural appearance.

Faber Clean Wood is designed to avoid this problem.

When correctly diluted, the cleaner removes everyday contamination without leaving unwanted stickiness, streaks or visible marks behind.

This is particularly important on wooden floors because streaks can become very noticeable under natural light.

The result is a cleaner, fresher-looking floor that retains its natural character.

## Restores and Enhances the Appearance of Wood

Regular cleaning is not simply about hygiene. It also plays an important role in maintaining the appearance of wooden flooring.

Dust, soil and fine grit gradually make a floor look dull. These particles can also act abrasively when walked across repeatedly.

Faber Clean Wood removes this everyday contamination while helping revive the brightness and natural appearance of the treated surface.

It does not create an artificial heavy coating over the wood. Instead, regular cleaning helps keep the existing finish looking cleaner and better maintained.

This makes it ideal for attractive parquet and natural wood floors where preserving the original appearance is important.

## Fresh Fragrance for Regular Cleaning

Clean Wood leaves behind a pleasant fresh fragrance after cleaning.

This makes it particularly suitable for residential properties and customer-facing commercial environments where the freshness of the room contributes to the overall impression of cleanliness.

Hotels, offices, shops and similar premises can therefore clean their wooden flooring while simultaneously leaving the surrounding environment feeling fresher.

The fragrance complements rather than replaces the principal function of the product: professional daily wood cleaning.

## Highly Concentrated and Economical

Faber Clean Wood Greentech offers excellent economy because very little concentrated product is required for each bucket of cleaning solution.

The recommended concentration is approximately **50–100g of Clean Wood per 5 litres of water**.

This means a single litre can treat an exceptionally large floor area, with approximate coverage reaching **1,000m² per litre**, depending on the application and surface conditions.

For commercial premises with substantial areas of wooden flooring, this concentration can significantly reduce product consumption compared with ordinary ready-to-use cleaners.

## How to Use Faber Clean Wood Greentech

Correct dilution and controlled moisture are essential when cleaning wooden floors.

**Step 1 – Remove loose dirt**

Vacuum, sweep or dust-mop the floor thoroughly.

Remove sand, grit, hairs, crumbs and loose particles before wet cleaning. This prevents abrasive particles from being dragged across the wood by the mop.

**Step 2 – Prepare the cleaning solution**

Dilute approximately **50–100g of Faber Clean Wood in 5 litres of clean water**.

Use the lower concentration for routine light cleaning and increase towards the recommended maximum when dealing with greater levels of everyday contamination.

Do not assume that using excessive detergent will improve the result.

**Step 3 – Prepare your mop**

A traditional mop, flat mop or suitable cleaning cloth can be used.

Immerse the mop in the prepared solution and wring it thoroughly.

Wood floors should be cleaned using controlled moisture. The mop should be damp rather than dripping wet.

**Step 4 – Wash the floor**

Clean the floor systematically, following the direction of the boards where practical.

Work in manageable sections and avoid flooding the timber or leaving pools of cleaning solution standing on the surface.

Pay additional attention to high-traffic areas where dirt is more concentrated.

**Step 5 – Allow the floor to dry**

When Clean Wood is used at the recommended concentration, **no rinsing is required**.

Simply allow the floor to dry naturally.

The correctly diluted cleaner should leave no streaks, sticky film or unwanted surface residue.

## Cleaning Oiled Wood Floors

Oiled floors require particularly careful maintenance because aggressive detergents can gradually affect their protective treatment.

Faber Clean Wood provides a gentle method of removing routine contamination while respecting compatible oiled surfaces.

Always use a well-wrung mop and avoid excessive water.

Remember that a daily cleaner does not replace periodic oil maintenance. If an oiled floor begins looking dry or inadequately protected, it may eventually require a suitable maintenance oil or refresher in addition to regular cleaning.

## Cleaning Varnished Wood Floors

Clean Wood is equally useful for compatible lacquered or varnished wooden flooring.

The protective coating makes these floors less absorbent than bare timber, but excessive water should still be avoided.

Vacuum first, use the recommended dilution and clean with a well-wrung mop.

Regular removal of grit and dirt can also help reduce unnecessary abrasion of the protective lacquer caused by foot traffic.

## Important Usage Recommendations

Never flood a wooden floor during cleaning.

Standing water can penetrate joints, gaps or damaged sections of the finish and may cause problems such as swelling, distortion or staining.

Do not use Faber Clean Wood undiluted for routine cleaning. It is a concentrated product and should be diluted according to the recommended instructions.

Avoid mixing it with bleach, acidic cleaners, strong alkaline degreasers or unrelated cleaning chemicals.

If the existing wood finish is unknown or particularly delicate, test the prepared solution on a small inconspicuous section first.

For heavily greased, damaged or unusually contaminated flooring, establish whether specialist restoration or deep cleaning is required rather than repeatedly increasing the concentration of a daily maintenance cleaner.

## Ideal for Residential and Commercial Floor Care

Faber Clean Wood Greentech is equally practical for domestic and professional users.

Homeowners can use it for routine maintenance of living rooms, bedrooms, hallways and other areas containing wood flooring.

Professional cleaners can incorporate it into regular maintenance programmes for offices, hotels, shops, schools and other commercial environments.

Its combination of high concentration, approximately 1,000m² per litre coverage and straightforward no-rinse application makes it particularly practical where large areas need to be maintained efficiently.

## Professional Wood Cleaning with an Eco-Friendly Approach

Faber Clean Wood Greentech combines professional wood-floor maintenance with an environmentally considered formulation.

Its 100% water-based formula uses rapidly biodegradable plant-derived ingredients while still delivering the cleaning performance required for everyday dirt and contamination.

Suitable for compatible oiled and varnished wood, it cleans without leaving the irritating sticky residues or streaks associated with unsuitable floor detergents. It also helps revive the natural appearance of the surface while leaving behind a pleasant fresh fragrance.

Simply vacuum the floor, dilute **50–100g in 5 litres of water**, apply using a well-wrung mop or cloth and allow the surface to dry naturally. At the recommended dilution, there is **no need to rinse**.

For homeowners, professional cleaners and commercial facilities looking for an economical and environmentally responsible way to maintain beautiful timber flooring, **Faber Clean Wood Greentech offers a highly concentrated, easy-to-use and effective solution for regular wood and parquet floor care.**